Stoody 966-G Gas Shielded Hardfacing Wire

0.045 (1.2 mm), 33lb (15 kg) spool

STOODY 966-G is a molybdenum-tungsten high speed tool steel with a high concentration of uniformly distributed small primary carbides. The presence of the small carbides greatly improve the wear resistance when compared to M-7 tool steel. Stoody 966-G provides wear resistance greater than or equal to that of conventional chromium carbides but does not cross check when proper preheat and welding procedures are used. It is recommended for parts where cross checking is undesirable. It can be applied crack free without preheat on carbon, 300 series stainless and manganese steels, when proper preheat and interpass temperatures are maintained. Post weld heat treatment may be required for other base metals. The deposit will crack on cast irons. The material is characterized by a high  hardness (62-67).

Typical Applications

• Tillage Tools
• Tire Shredders
• Hard Banding
• Cutting and Shaving knives
• Extruder Screws
• Shear Blades, Blanking Dies
• Piercing Dies
• Excellent for cladding high wear areas on equipment

• Specifications and Parameters

  • Hardness: 62-67 HRC
  • Shielding Gas: 75-80% Ar, Balance CO₂
  • 0.045 (1.2 mm), 33lb (15 kg) Spool
  • Stoody Part Number: 11965900