Sumner Pipe Purge Buddy – Inflatable Purge Dam

 

Inflatable purge dams create an air tight seal for purging and low pressure testing operations.  Purge dam bladder is filled through a standard Schrader valve with a bicycle pump or air compressor.  Please note maximum inflation pressure when inflating purge dams.

• Heat resistant to 100˚C 210˚F
• Heavy duty polyester cotton impregnated with canvas material
• Latex bladder
• Pull loops for inside of the pipe
• 1.5 m 4.8 ft. inflation hose
• Vent loops to secure argon hose

• Size		Part No.		Max Inflation Pressure
  2 (50 mm)		786080		15 PSI 1.03 Bar
  3 (75 mm)		786081		15 PSI 1.03 Bar
  4 (100 mm)		786082		15 PSI 1.03 Bar
  5 (125 mm)		786083		15 PSI 1.03 Bar
  6 (150 mm)		786084		15 PSI 1.03 Bar
  8 (200 mm)		786085		14 PSI 0.96 Bar
  10 (250 mm)		786086		10 PSI 0.68 Bar
  12 (300 mm)		786087		8 PSI 0.55 Bar
  14 (350 mm)		786088		7 PSI 0.48 Bar
  16 (400 mm)		786089		6.5 PSI 0.45 Bar
  18 (450 mm)		786090		6 PSI 0.41 Bar
  20 (500 mm)		786091		5 PSI 0.34 Bar
  22 (550 mm)		786092		4.5 PSI 0.31 Bar
  30 (750 mm)		786095		3.25 PSI 0.22 Bar

   

  Purge dams for pipe sizes 24 through 32 available upon request.

  Options	2" (50 mm) – 786080, 3" (75 mm) – 786081, 4" (100 mm) – 786082, 5" (125 mm) – 786083, 6" (150 mm) – 786084, 8" (200 mm) – 786085, 10" (250 mm) – 786086, 12" Purge Buddy – 786087, 14" Purge Buddy – 786088, 16" Purge Buddy – 786089, 18" Purge Buddy – 786090, 20" (500 mm) – 786091, 22" (550 mm) – 786092, 24" (600 mm) – 786093, 30" (750 mm) – 786095